Motor Driven Power Steering DTCS
MOTOR DRIVEN POWER STEERING DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION
| DTC | Description |
|---|---|
| DTC C1101 | 17: Battery Voltage High |
| DTC C1102 | 16: Battery Voltage Low |
| DTC C1109 | 21: IG1 Open - MDPS Fail Safe |
| DTC C1112 | 01: Sensor Source Voltage |
| DTC C1259 | 01: Steering Angle Sensor - Electrical |
| DTC C1261 | 54: Steering Angle Sensor is not Calibrated |
| DTC C1262 | 04: Temperature Sensor Failure |
| DTC C1290 | 02: Torque Sensor Signal Fail |
| DTC C1603 | 98: ECU thermal protection |
| DTC C1604 | 04: ECU Hardware Error |
| DTC C1611 | 87: CAN Time-out EMS |
| DTC C1613 | 86: CAN Signal Error EMS |
| DTC C1616 | 88: C-CAN Bus OFF |
| DTC C1622 | 86: EMS invalid Vehicle Speed |
| DTC C1628 | 87: CAN Time-out Cluster |
| DTC C1692 | 87: CAN time-out ESC |
| DTC C1693 | 83: ESC Signal Error |
| DTC C1700 | 04: Byte Coding Error |
| DTC C1702 | 55: Variant Coding Error |
| DTC C1711 | 04: Improper program termination |
| DTC C1804 | 87: CAN time-out LKAS |
| DTC C1805 | 83: CAN Signal Error LKAS |
| DTC C2412 | 01: Motor Short or Open |
| DTC C2413 | 01: Motor Current Fail (Current Over) |