LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2020 >> Elantra Value Edition >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Ignition Switch Assembly >> Repair Procedures >> Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel.

    (Refer to Body - "CRASH PAD LOWER PANEL ")

  3. Remove the steering column upper & Lower shroud.
  4. Remove the ignition switch (A) and disconnecting the Key Warning/immobilizer connector.
    G14083732Courtesy of HYUNDAI MOTOR AMERICA
  5. If it is necessary to remove the key lock cylinder (A), remove the key lock cylinder (A) after pushing lock pin (B) with key ACC.
    G14083733Courtesy of HYUNDAI MOTOR AMERICA
    G14083734Courtesy of HYUNDAI MOTOR AMERICA
  6. Installation is the reverse of removal procedure.
scientia non olet · About LEMON Manuals