Repair Procedures: Inspection

Information 

Inspect the connector thoroughly for looseness, poor connection, bending, corrosion, contamination, deformation, or damage.

1. Disconnect the parking switch connector.
2. Turn Ignition "ON", & engine "OFF".
3. Measure the output signal in each range (P, R, N, D).
   SIGNAL CODE SPECIFICATIONS
   
   

   Signal	P	R	N	D
   S1	18.3 %	47.5 %	64.6 %	81.7 %
   S2	81.7 %	52.5 %	35.4 %	18.3 %

   PIN AND CONNECTION SPECIFICATIONS
   
   

   Pin	Connection information
   1	Power (Ps, Ns)
   2	Back-up lamp
   3	Power (Back-up lamp)
   4	Ps, Ns
   5	Power (5V)
   6	Ground (5V)
   7	S1
   8	S2