Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.

NOTE:

If the oil seal on the transaxle case side is damaged and fluid is leaking, replace the oil seal with a new unit.

When installing the new oil seal, use the specialized tool.

Oil seal installer both sides: 09431-26100

Courtesy of HYUNDAI MOTOR AMERICA

Handle both sides: 09231-H1100

Courtesy of HYUNDAI MOTOR AMERICA

To install, reverse the removal procedures.
Refill the manual transaxle fluid after Installing the manual transaxle.
(Refer to "MANUAL TRANSAXLE FLUID ")
Perform bleeding air procedure in concentric slave cylinder after pouring the brake fluid.
(Refer to Clutch System - "CONCENTRIC SLAVE CYLINDER ")