October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Repair Procedures: Inspection
- Turn the ignition switch OFF.
- Connect the diagnostic tool to Data Link Connector (DLC).
- Turn the ignition switch ON.
- Select "Vehicle, Model year, Engine, System".
- Connect a diagnostic tool and then operate the integrated thermal management module (ITM).
- Determine if the ITM is normal.
- If DTC code occurred, refer to the ENGINE CONTROL SYSTEM (2.0L)
DTC information.