Repair Procedures: Inspection
- Turn ignition switch OFF.
- Remove the oil pressure and oil temperature sensor.
(Refer to - "REMOVAL ")
- After immersing the thermistor of the sensor into engine coolant, measure resistance between the OTS terminals 1 and 4.
- Check that the resistance is within the specification.
Temperature [°C (°F)] Resistance (KΩ) -40 (-40) 125.53 - 136.70 -20 (-4) 63.89 - 71.23 0 (32) 26.83 - 30.07 20 (68) 11.13 - 12.48 40 (104) 4.89 - 5.50 60 (140) 2.32 - 2.61 80 (176) 1.17 - 1.32 100 (212) 0.63 - 0.71 120 (248) 0.37 - 0.41 140 (284) 0.22 - 0.25 160 (320) 0.14 - 0.16