Repair Procedures: Inspection: Notes

[Driver Power Window Switch] 

1. Disconnect the negative (-) battery terminal.
2. Remove the driver door trim.

   (Refer to Body - "FRONT DOOR TRIM ")

3. Disconnect the power window switch (A) connector from the door trim.

   Courtesy of HYUNDAI MOTOR AMERICA

4. Check for continuity between the terminals in each switch position as displayed below.

   [Power Window Switch Inspection] 

   Courtesy of HYUNDAI MOTOR AMERICA

   [Power Door Lock Switch Inspection] 

   Courtesy of HYUNDAI MOTOR AMERICA

   [Power Window Lock Switch Inspection] 

   Courtesy of HYUNDAI MOTOR AMERICA