LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2021 >> Palisade Calligraphy, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Engine Control System) >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Adjustment >> ETC Module Learning Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ETC Module Learning Procedure

WARNING: This page is about a different car, the 2023 Hyundai Palisade. However, it is still accessible from the selected car via links, so may be relevant.

Be sure to perform the ETC module learning procedure when replacing or re-installing the ETC module.

  1. Wait for 1 minute with the ignition switch ON.
  2. Start the engine and hold the idle status for 15 minutes.
  3. Waif for 1 minute with the ignition switch OFF.
  4. Restart the engine, check that the idle speed is stable.
    NOTE:
    • Failing to perform the ETC module learning procedure after replacement or reinstallation may lead to MIL illumination with DTCs.
scientia non olet · About LEMON Manuals