| DTC Strategy |
|
- Poor connector connection
- Faulty N position setting
- Faulty position sensor circuit
- Faulty position sensor
- Faulty SCU
|
| Enable Condition |
- Ignition "ON" or engine "ON"
- Battery voltage is above 10V
|
| Threshold Value |
- Invalid range signal is detected (S1+S2 signal is less then 95% or higher than 105%)
|
| Detecting Time |
|
| Fail Safe |
- Before DTC determination: keep previous signal
- After DTC determination
- Maintain current stage, display SBW system warning message when requesting D/n/r stage
- P-level request: EPB signing request/parking warning
|
| MIL ON Condition |
|