LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2021 >> Palisade SE, FWD >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Tires/Wheels/Alignment >> Alignment >> Repair Procedures >> Rear Wheel Alignment >> Camber
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Rear Wheel Alignment: Camber

  1. Loosen the nut holding the rear lower arm cam bolt (A).
  2. Adjust rear camber by turning the rear lower arm cam bolt (A) clockwise or counter clockwise. Rear camber adjustment should be made by turning the right and left cam bolt by the same amount.

    Camber angle  : - 1.0° ± 0.5°

    G14426654Courtesy of HYUNDAI MOTOR AMERICA
  3. When completing the toe adjustment, tighten the nut to specified torque.

    Tightening torque: 

    137.3 - 156.9 N.m (14.0 - 16.0 kgf.m, 101.3 - 115.7 lb-ft)

scientia non olet · About LEMON Manuals