| DTC Strategy |
|
- Poor connection or damaged harness
- Open in HO2S control circuit
- Front HO2S
|
| Case 1 |
Enable Conditions |
- Closed loop fuel control
- Fuel factor changes are higher than 0.1.
|
| Threshold Value |
- Sensor voltage is between 1.49v and 1.51V.
|
| Case 2 |
Enable Conditions |
- Target lambda is between 0.97 and 1.03.
- Integrated mass flow is higher than 0.3kg.
|
| Threshold Value |
- Sensor voltage is between 1.49v and 1.51V.
|
| Case 3 |
Enable Conditions |
|
| Threshold Value |
- Front O2 sensor voltage is lower than 0V.
|
| Diagnostic Time |
|
| MIL On Condition |
|