| Main Action |
|
- Open or short to ground in signal circuit
- Poor connection or damaged harness
- Faulty TPS2
|
| Case 1 |
Prerequisite Condition |
- Ignition switch is turned "ON".
|
| Threshold value |
- Output voltage of TPS2 is lower than 0.12V.
- Sensor signal circuit is open or shorted to ground.
|
| Case 2 |
Prerequisite Condition |
- Ignition switch is turned "ON"
- Engine is at idle with accelerator pedal value below 0.01%.
|
| Threshold value |
- Output voltage of TPS2 at idle is lower than 2.0V.
- Sensor signal circuit is open or shorted to ground.
|
| Diagnosis Time |
- Continuously (for 0.05 seconds by repeated 10 msec.)
|
| MIL On Condition |
|