Repair Procedures: Removal
- Disconnect the battery (-) terminal.
- Remove the engine cover.
(Refer to Engine Mechanical System - "ENGINE COVER ")
- Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "AIR CLEANER ")
- Remove the intercooler inlet pipe & hose assembly.
(Refer to Engine Mechanical System - "INTERCOOLER ")
- Disconnect the EWGA connector (A).
- Remove the exhaust manifold heat protector installation blot (A).
- Remove the shaft link assembly (B) after removing the C-ring (A).
- Remove the EWGA after removing the bolts (A).
CAUTION:
- When carrying the turbo charger, do not hold the rod of the turbo charge to prevent bending the rod.