Repair Procedures: Installation
- To install, reverse the removal procedure.
- Inject the automatic transaxle fluid and inspect the fluid level.
(Refer to Automatic Transaxle System - "AUTOMATIC TRANSAXLE FLUID (ATF) ")
CAUTION:- After ATF level check or exchange, be sure to remove residual ATF on transaxle case.
(Be especially sure to remove residual ATF between automatic transaxle case and valve body cover)
- After installing the valve body cover, make sure to check the oil leakage at the connection area with the engine ON.
- After ATF level check or exchange, be sure to remove residual ATF on transaxle case.
- Refill the coolant
(Refer to Engine Mechanical System - "COOLANT ")
- Refill the coolant of hybrid motor cooling system.
(Hybrid Motor System - " COOLANT ")