Repair Procedures: Removal
- Turn the ignition switch OFF and disconnect the battery (-) cable.
- Disconnect the mass air flow sensor connector (A) and the installation clamp (B).
- Remove the intake hose (C).
Tightening Torque:
3.0 - 5.0 N.m (0.3 - 0.5 kgf.m, 2.1 - 3.6 lb-ft)
- Remove the installation bolts (A), and then remove the sensor from the air cleaner.
Tightening Torque:
4.0 - 5.8 N.m (0.4 - 0.6 kgf.m, 2.8 - 4.3 lb-ft)