Repair Procedures: Removal

Information 

• With the ignition off, press the brake pedal and press the "N" button (A) for 3 seconds.

  Courtesy of HYUNDAI MOTOR AMERICA

1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
2. Remove the air cleaner assembly and air duct.

   (Refer to Engine Mechanical System - "AIR CLEANER ")

3. Disconnect the electronic shift actuator connector (A) and then separate the wiring clip (B).

   Courtesy of HYUNDAI MOTOR AMERICA

4. Loosen the bolts and then removing the electronic shift actuator (A).

   Courtesy of HYUNDAI MOTOR AMERICA

5. Disconnect the position sensor connector (A).

   Courtesy of HYUNDAI MOTOR AMERICA

6. Loosen the bolts and then removing the position sensor (A).

   Courtesy of HYUNDAI MOTOR AMERICA