Motor Driven Power Steering System DTCS
MOTOR DRIVEN POWER STEERING SYSTEM DIAGNOSTIC TROUBLE CODE IDENTIFICATION
| DTC | Description |
|---|---|
| DTC C1101-17 | Battery Voltage High |
| DTC C1102-16 | Battery Voltage Low |
| DTC C1109-21 | IG1 Open - MDPS Fail Safe |
| DTC C1112-01 | Sensor Source Voltage |
| DTC C1202-86 | Wheel Speed Sensor Front-LH Invalid/No Signal |
| DTC C1205-86 | Wheel Speed Sensor Front-RH Invalid/No Signal |
| DTC C1208-86 | Wheel Speed Sensor Rear-LH Invalid/No Signal |
| DTC C1211-86 | Wheel Speed Sensor Rear-RH Invalid/No Signal |
| DTC C1261-54 | Steering Angle Sensor Is Not Calibrated |
| DTC C1262-04 | Temperature Sensor Failure |
| DTC C1290-02 | Torque Sensor Signal Fail |
| DTC C1603-4B | ECU Thermal Protection |
| DTC C1604-04 | ECU Hardware Error |
| DTC C1606-04 | ECU Software Error |
| DTC C1614-87 | CAN Time-Out HCU/VCU/FCU |
| DTC C1616-88 | C-CAN Bus OFF |
| DTC C161C-86 | CAN Signal Error HCU/VCU/FCU |
| DTC C161F-86 | Invalid Vehicle Speed |
| DTC C1628-87 | CAN Time-Out Cluster |
| DTC C1629-86 | Cluster Invalid Counter |
| DTC C1633-86 | Cluster Invalid Displayed Speed |
| DTC C1659-87 | CAN Time-Out SAS |
| DTC C166B-87 | CAN Time-Out WHL_SPD |
| DTC C1692-87 | CAN Time-Out ESC |
| DTC C1693-86 | ESC Signal Error |
| DTC C1696-87 | CAN Time-Out PA/RSPA |
| DTC C1697-86 | CAN Message Failure - PA/RSPA |
| DTC C16B2-86 | WHL_SPD Checksum/Alive Counter Error |
| DTC C16BF-64 | WHL_SPD Monitoring Logic Error |
| DTC C1700-04 | Byte Coding Error |
| DTC C1702-55 | Variant Coding Error |
| DTC C1704-01 | ECU Fail-Safe Relay Fail |
| DTC C1705-04 | ECU Pre-Charge Circuit Fail |
| DTC C1711-01 | Improper Program Termination |
| DTC C1804-87 | CAN Time-Out LKA |
| DTC C1805-86 | LKA CAN Signal Error |
| DTC C1814-83 | CAN Message Failure - SAS |
| DTC C1814-86 | CAN Message Failure - SAS |
| DTC C1866-87 | CAN Time-Out ICSC |
| DTC C2401-62 | Motor Circuit |
| DTC C2412-16 | Motor Short Or Open |
| DTC C2412-62 | Motor Short Or Open |
| DTC C2413-19 | Motor Current Fail (Current Over) |
| DTC C2413-28 | Motor Current Fail (Current Over) |
| DTC C2413-96 | Motor Current Fail (Current Over) |