ECM neutralization procedure (With Immobilizer)
CAUTION:
- When replacing the ECM, the vehicle equipped with the immobilizer must be performed procedure as below.
[In the case of installing used ECM]
- Perform "ECM Neutral mode" procedure with diagnostic tool. (Refer to Body Electrical System - "IMMOBILIZER SYSTEM ")
- After finishing "ECM Neutral mode", Perform
"Key teaching" procedure with diagnostic tool. (Refer to Body Electrical System - "IMMOBILIZER SYSTEM
")
[In the case of installing new ECM]
- Perform "Key teaching" procedure with diagnostic tool. (Refer to Body Electrical System - "IMMOBILIZER SYSTEM ")