Repair Procedures: Inspection
- Turn ignition switch OFF.
- Remove the oil pressure & oil temperature sensor. (Refer to - "REMOVAL ")
- After immersing the thermistor of the sensor into engine coolant, measure resistance between the OTS terminals 1 and 4.
- Check that the resistance is within the specification.
Temperature [°C (°F)] Resistance (KΩ) -40 (-40) 125.53 - 136.70 -20 (-4) 63.89-71.23 0 (32) 26.83-30.07 20 (68) 11.13-12.48 40 (104) 4.89-5.50 60 (140) 2.32-2.61 80 (176) 1.17-1.32 100 (212) 0.63-0.71 120 (248) 0.37-0.41 140 (284) 0.22-0.25 160 (320) 0.14-0.16