LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2023 >> Palisade SE, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Oil Pressure Sensor (OPS) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. Remove the water center pipe.

    (Refer to Engine Mechanical System - "WATER TEMPERATURE CONTROL ASSEMBLY ")

  3. Remove the oil pressure & oil temperature sensor (OPTS) (A) by using SST (09211-G9000).
    G00637374Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals