Repair Procedures: Installation

To install, reverse the removal procedure.
Inject the automatic transaxle oil and inspect the oil level.
(Refer to Automatic Transaxle System - "AUTOMATIC TRANSAXLE FLUID ")
CAUTION:
- After ATF level check or exchange, be sure to remove residual ATF on transaxle case.
  (Be especially sure to remove residual ATF between automatic transaxle case and valve body cover)
- After installing the valve body cover, make sure to check the oil leakage at the connection area with the engine ON.
After ATF level check or exchange, be sure to remove residual ATF on transaxle case.
(Be especially sure to remove residual ATF between automatic transaxle case and valve body cover)
Check for leakage of coolant or fluid from hose connection during engine start.