October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

ETC Module Learning Procedure

Be sure to perform the ETC module learning procedure when replacing or re-installing the ETC module.

Wait for 1 minute with the ignition switch ON.
Start the engine and hold the idle status for 15 minutes.
Waif for 1 minute with the ignition switch OFF.
Restart the engine, and check that the idle speed is stable.
NOTE:
- If the ETC module learning procedure is not performed after replacing or reinstalling the ETC module, MIL illumination with DTCs may occur.