Repair Procedures: Inspection
- Turn the ignition switch OFF.
- Disconnect the ATS connector.
- Measure resistance between the ATS terminals 1 and 2.
- Check that the resistance is within the specification.
| Temperature [°C (°F)] | Resistance (kΩ) |
|---|---|
| -40 (-40) | 841.2 - 1019.3 |
| -20 (-4) | 263.8 - 306.5 |
| 0 (32) | 92.4 - 102.8 |
| 10 (50) | 57.0 - 62.2 |
| 20 (68) | 36.2 - 38.8 |
| 40 (104) | 15.3 - 16.7 |
| 50 (122) | 10.3 - 11.4 |
| 60 (140) | 7.1 - 8.0 |
| 80 (176) | 3.5 - 4.0 |