Power Steering System DTCS
POWER STEERING SYSTEM DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION
| DTC | Description |
|---|---|
| C1101-17 | Battery Voltage High |
| C1102-06 | Battery Voltage Low |
| C1109-21 | IG1 Open - MDPS Fail Safe |
| C1112-01 | Sensor Source Voltage |
| C1112-1C | Sensor Source Voltage |
| C1202-86 | Wheel Speed Sensor Front-LH Invalid/No Signal |
| C1205-86 | Wheel Speed Sensor Front-RH Invalid/no Signal |
| C1208-86 | Wheel Speed Sensor Rear-LH Invalid/no Signal |
| C1211-86 | Wheel Speed Sensor Rear-RH Invalid/no Signal |
| C1261-54 | Steering Angle Sensor is not Calibrated |
| C1262-04 | Temperature Sensor Failure |
| C1290-02 | Torque Sensor Signal Fail |
| C1603-4B | ECU thermal protection |
| C1604-04 | ECU Hardware Error |
| C1606-04 | ECU Software Error |
| C1611-87 | CAN Time-out EMS |
| C1613-86 | CAN Signal Error EMS |
| C1614-87 | CAN Time-Out HCU/VCU/FCU |
| C1616-88 | C-CAN Bus OFF |
| C161C-86 | HCU Signal Error |
| C161F-86 | Invalid Vehicle Speed |
| C1628-87 | CAN Time-out Cluster |
| C1629-86 | Cluster Invalid Counter |
| C1633-86 | Cluster Invalid Displayed Speed |
| C166B-87 | CAN time-out Wheel Speed Sensor |
| C1692-87 | CAN time-out ESC |
| C1693-86 | ESC Signal Error |
| C1696-87 | CAN Time-Out SPAS/PA |
| C1697-86 | CAN Message Failure - SPAS |
| C16B2-86 | WHL_SPD Checksum/Alive Counter Error |
| C16BF-64 | WHL_SPD Monitoring logic Error |
| C1700-04 | Byte Coding Error |
| C1702-55 | Variant Coding Error |
| C1804-87 | CAN time-out LKAS |
| C1805-86 | LKAS CAN Signal Error |
| C1814-86 | CAN Message Failure - SAS |
| C1866-87 | CAN Time-Out ICSC |
| C2401-62 | Motor Circuit |
| C2412-16 | Motor Short or Open |
| C2412-62 | Motor Short or Open |
| C2413-19 | Motor Current Fail (Current Over) |
| C2413-28 | Motor Current Fail (Current Over) |
| C2413-96 | Motor Current Fail (Current Over) |