Repair Procedures: Removal

Turn ignition switch OFF and disconnect the negative (-) battery cable.
Remove the console upper cover.
(Refer to Body (Interior and Exterior) - " FLOOR CONSOLE ASSEMBLY REPAIR PROCEDURES ")
Loosen the screw and then remove the electric shift button (A).

Courtesy of HYUNDAI MOTOR AMERICA
Loosen the screw and then remove the bezel (A) from the electric shift button.

Courtesy of HYUNDAI MOTOR AMERICA
Using a (-) driver and then remove the each position button.
[P Button]

Courtesy of HYUNDAI MOTOR AMERICA

[R Button]

Courtesy of HYUNDAI MOTOR AMERICA

[N Button]

Courtesy of HYUNDAI MOTOR AMERICA

[D Button]

Courtesy of HYUNDAI MOTOR AMERICA