(Speed Sensor Removal And Installation)
ABBREVIATED PROCEDURE
| Work | H/W | Tightening torque N.m (kgf.m/lb-ft) | SST/Equipment | Chemical | etc | |
|---|---|---|---|---|---|---|
|
||||||
| 1 | Disconnect the battery (-) terminal | - | - | - | - | - |
| 2 | Drain the fluid after removing the drain plug | - | - | - | - | - |
| 3 | Reinstall the drain plug | Bolt | 4.9 - 5.9 (3.4 - 4.4/24.6 - 31.8) | - | - | Refer to appropriate service information |
| 4 | Separate the wiring clip | - | - | - | - | - |
| 5 | Disconnect the connector | Bolt | - | - | - | - |
| 6 | Remove the upper intercooler hose | Bolt | 11.8 - 13.7 (1.2 - 1.4/8.7 - 10.1) | - | - | - |
| 7 | Remove the intercooler hose | Bolt | 9.8 - 11.8 (1.0 - 1.2/7.2 - 8.7) | - | - | - |
| 8 | Remove the valve body cover after removing the bolts | Bolt | 9.8 - 11.8 (1.0 - 1.2/7.2 - 8.7) | - | - | Refer to appropriate service information |
| 9 | Separate the main harness after removing the bolts | Bolt | 9.8 - 11.8 (1.0 - 1.2/7.2 - 8.7) | - | - | - |
| 10 | Remove the valve body assembly after removing the bolts | Bolt | 9.8 - 11.8 (1.0 - 1.2/7.2 - 8.7) | - | - | Refer to appropriate service information |
| 11 | Disconnect the speed sensor connector | - | - | - | - | - |
| 12 | Remove the speed sensor after removing the bolts | Bolt | 9.8 - 11.8 (1.0 - 1.2/7.2 - 8.7) | - | - | - |
|
||||||
| Installation is the reverse of removal. | Refer to appropriate service information | |||||
|
||||||
|
||||||