April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation

Disconnect the battery negative (-) terminal.
Disconnect the Boost Pressure Sensor (BPS) connector (A).

Courtesy of HYUNDAI MOTOR AMERICA
Remove the Boost Pressure Sensor (BPS) (A) after removing the bolt.
Tightening torque:

9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 Ib-ft)

Courtesy of HYUNDAI MOTOR AMERICA
Install in the reverse order of removal.