IAU Learning Status Inspection
WARNING: This page is about a different car, the 2024 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
Information
- Digital key function works only when the learning states of IAU and IBU are learnt.
- You can confirm the learning status as below:
- Connect the cable of diagnostic tools to the data link connector in driver side crash pad lower panel.
- Select the "S/W Management" and "IAU-IBU learning status".
- Check the IAU learning status.
Mark Description Learning status Virgin Initial state Non-learning state Learnt Learning completiond state Learning completiond state Neutralized Neutral state Non-learning state