Wheel Alignment Specifications

WARNING: This page is about a different car, the 1992 Infiniti Q45, 1992 Infiniti M30, and 1992 Infiniti G20. However, it is still accessible from the selected car via links, so may be relevant.

WHEEL ALIGNMENT SPECIFICATIONS (G20)

Application

Preferred

Range

Camber ⁽¹⁾

Front

-0.75 To 0.75

Rear

-1

-1.75 To 0.25

Caster ⁽¹⁾

Front

1.83

1.08 To 2.58

Toe-In ⁽²⁾

Front

0.04 ⁽¹⁾

0 To 0.08 (0 To 2)

Rear

-0.8 To 0.8 (-2 To 2)

Toe-In ⁽¹⁾

Front

0 To 0.2

Rear

-0.16 To 0.16

Toe-Out On Turns ⁽¹⁾

Inner

33 To 37

Outer

28 To 32

SAI ⁽¹⁾

14.5

N/A

⁽¹⁾	Measurement in degrees.

⁽²⁾	Measurement in inches.

WHEEL ALIGNMENT SPECIFICATIONS (M30)

Application

Preferred

Range

Camber ⁽¹⁾

Front

0.17

-0.58 To 0.92

Rear

-0.37

-1.08 To 0.33

Caster ⁽¹⁾

Front

4.67

3.92 To 5.42

Toe-In ⁽²⁾

Front

-0.4 To 0.4 (-1 To 1)

Rear

-0.09 (-2)

-0.18 To 0 (-4 To 0)

Toe-In ⁽¹⁾

Front

-0.08 To 0.08

Rear

-0.18

-0.36 To 0

Toe-Out On Turns ⁽¹⁾

Inner

42.5

40.5 To 44.5

Outer

33.5

N/A

SAI ⁽¹⁾

12.67

N/A

⁽¹⁾	Measurement in degrees.

⁽²⁾	Measurement in inches.

WHEEL ALIGNMENT SPECIFICATIONS (Q45)

Application

Preferred

Range

With Active Suspension

Camber ⁽¹⁾

Front

-0.92

-1.67 To -0.17

Rear

-1.5

-2 To -1

Caster

Front ⁽¹⁾

6.92

6.17 To 7.67

Toe-In ⁽²⁾

Front

-0.04 To 0.04 (-1 To 1)

Rear

0.08 ⁽²⁾

0 To 0.16 (0 To 4)

Toe-In ⁽¹⁾

Front

-0.08 To 0.08

Rear

0.18

0 To 0.36

Toe-Out On Turns ⁽¹⁾

Inner

35 To 39

Outer

N/A

SAI ⁽¹⁾

12.92

N/A

W/O Active Suspension

Camber ⁽¹⁾

Front

-0.83

-1.58 To -0.08

Rear

-1.08

-1.58 To -0.58

Caster ⁽¹⁾

Front

6.5

5.75 To 7.25

Toe-In ⁽²⁾

Front

0.04 ⁽¹⁾

0 To 0.08 (0 To 2)

Rear

0.08 ⁽²⁾

0 To 0.16 (0 To 4)

Toe-In ⁽¹⁾

Front

0.08

0 To 0.16

Rear

0.18

0 To 0.36

Toe-Out On Turns ⁽¹⁾

Inner

37.5

35.5 To 39.5

Outer

N/A

12.75

N/A

⁽¹⁾	Measurement in degrees.

⁽²⁾	Measurement in inches.