LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 1992 >> M30 2D Convertible >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Ignition Checks >> Optical Ignition System Checks (G20 & M30) >> Ground Circuit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ground Circuit

  1. Turn ignition off. Disconnect resistor and condenser harness connector. Disconnect power transistor harness connector. Using ohmmeter, check continuity between ignition coil terminal "b" to resistor and condenser terminal "d" and power transistor terminal "i". See Fig 1 .
  2. Connect ohmmeter leads between power transistor terminal "h" and ground. See Fig 1 . If continuity does not exist at all these terminals, check and repair wiring harness or connectors.
Fig 1: Checking Ground Circuit (G20 & M30)
G90G18750Courtesy of NISSAN MOTOR CO., U.S.A.