Torque Specifications
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | ||
|---|---|---|---|
| Cylinder Tube Fittings | 15-19 (21-26) | ||
| Gear Housing Bracket Bolt | |||
| G20 | 54-72 (74-98) | ||
| M30 | 62-80 (84-108) | ||
| Q45 | 65-80 (88-108) | ||
| High Pressure Connector | |||
| G20 & M30 | 11-18 (15-25) | ||
| Q45 | 22-26 (30-35) | ||
| Low Pressure Connector | |||
| G20 & M30 | 20-29 (27-39) | ||
| Q45 | 27-30 (36-40) | ||
| Pump Bracket Bolt | 20-26 (27-35) | ||
| Pump Connector Banjo Bolt | |||
| G20 & M30 | |||
| Inner | 51-58 (69-78) | ||
| Outer | 36-51 (49-69) | ||
| Q45 | 51-58 (69-78) | ||
| Pump Housing Bolt | 23-31 (31-42) | ||
| Pump Pulley Bolt | 40-50 (54-68) | ||
| Pump Sub-Bracket Bolt | 20-26 (27-35) | ||
| Pump Suction Pipe Bolt | 10-13 (14-18) | ||
| Rack End Cover Assembly | 44-54 (59-74) | ||
| Rack Lock Nut | 29-44 (39-59) | ||
| Rack Rear Housing Cover Bolt | 12-15 (16-21) | ||
| Rack Tube Banjo Bolt | 15-19 (21-26) | ||
| Steering Shaft Lower Joint Bolt | 18-21 (24-29) | ||
| Tie Rod End-To-Steering Knuckle Nut | |||
| G20 & Q45 | 21-29 (29-39) | ||
| M30 | 40-72 (54-98) | ||
| Tie Rod End-To-Tie Rod Nut | 58-72 (78-98) | ||
| Tie Rod End Jam Nut | 58-72 (78-98) | ||
| Tie Rod Inner Socket | 58-72 (78-98) | ||