October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Test 4
- Unplug 8-pin connector from control unit. See Figure
. Control unit is located in trunk, on right side. Check for battery voltage between connector terminal No. 2 and ground. If battery voltage exists, go to next step. If battery voltage does not exist, repair wire back to fuse panel.
- Connect jumper wire between connector terminals No. 2 and No. 3. If trunk opener operates, replace control unit. If trunk opener does not operate, repair trunk opener circuit. Refer to the DOOR LOCKS & TRUNK RELEASE - POWER
article.