LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 1993 >> G20 Automatic >> Repair and Diagnosis >> Electrical >> Starter >> Testing >> Bench Testing >> Pinion Extension Length (Hitachi)
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Pinion Extension Length (Hitachi)

  1. Disconnect "M" terminal lead from solenoid. Compare relative positions of pinion when solenoid is energized and when pinion is pulled out by hand. See Fig 1 .
  2. Difference between measurements should be .002-.0591" (.05-1.5 mm). If measurements are not as specified, remove solenoid, and install appropriate adjusting plate between solenoid and starter housing. Adjusting plates come in 2 thicknesses, .020" (.5 mm) and .031" (.8 mm).
Fig 1: Checking Starter Pinion Extension Clearance (Hitachi)
G92A00240Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals