October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Ground Circuit
- Turn ignition off. Disconnect power transistor and ignition coil harness connectors. Check continuity between ignition coil terminal "b" to power transistor terminal "e" (Green/Yellow wire). See Fig 1
.
- Connect ohmmeter leads between power transistor terminal "d" and ground. See Fig 1
. If continuity does not exist at all these terminals, check and repair wiring harness or connectors.
Courtesy of NISSAN MOTOR CO., U.S.A.