LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 1994 >> Q45 Base >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Testing >> ACCEL Switch Circuit Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ACCEL Switch Circuit Test

  1. Turn ignition off. Press and hold RESUME/ACCEL switch. Check voltage between cruise control module harness connector terminals No. 1 and 3. See Figure and Figure. If voltage is present, go to next step. If voltage is not present, go to step 3).
  2. Check voltage between terminals No. 1 and 3 after releasing RESUME/ACCEL switch. If voltage is present, go to step 3). If voltage is not present, test drive vehicle. If vehicle does not accelerate when RESUME/ACCEL switch is pressed, replace cruise control module. If vehicle does not maintain faster speed when RESUME/ACCEL switch is released, replace cruise control module.
  3. Press and hold RESUME/ACCEL switch. Using an ohmmeter, check for continuity between terminals No. 1 and 3 at RESUME/ACCEL switch. See Fig 1. If continuity does not exist, replace RESUME/ACCEL switch. If continuity exists, check RESUME/ACCEL wiring circuit.
Fig 1: Identifying Steering Switch Terminals
G93A83238Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals