October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Ignition Coil Resistance

Disconnect ignition coil harness connector. Using ohmmeter, check resistance between coil terminals No. 1 and 2 (cylinders No. 1 and 2) and terminals No. 2 and 3 (cylinders No. 3 and 8). See Fig 1 . Resistance should be approximately .7 ohm. If resistance is not as specified, replace ignition coil.

Fig 1: Checking Ignition Coil Resistance

Courtesy of NISSAN MOTOR CO., U.S.A.