LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 1995 >> G20 Automatic, 1RL4F03A >> Repair and Diagnosis >> Engine Performance >> Engine Controls - Adjustments 2.0L >> Adjustment >> Ignition Timing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Timing

  1. Ensure that no Diagnostic Trouble Codes (DTCs) are present. See TESTS W/CODES article. Start engine, and warm to normal operating temperature. Operate engine for 2 minutes at 2000 RPM under no-load. Check for smooth engine operation.
  2. Turn engine off. Disconnect throttle position sensor connector. Start engine and snap throttle to 2000-3000 RPM, 2 or 3 times, under no-load and then allow engine to return to idle.
  3. Connect timing light to cylinder No. 1 spark plug wire. Check ignition timing. See IGNITION TIMING  table. If necessary, adjust timing by loosening distributor mounting bolts and turning distributor. Reconnect throttle position sensor connector.
IGNITION TIMING (Degrees BTDC @ RPM)

Application (1) Specification
G20 13-17 @ 700-800
(1) With transmission in Neutral and no electrical load on engine.