October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

DTC Confirmation Test

Malfunction is detected when ECM receives improper voltage signal from FPCM. Possible causes are:

FPCM circuit open or shorted.
Defective dropping resistor.
Defective FPCM.

To set DTC, turn ignition on. Select DATA MONITOR with scan tool. Start engine and drive vehicle at 44-62 MPH with engine speed at 1800-2600 RPM for 12 seconds.