System Description

Power is supplied at all times:

From 40-amp fusible link (letter "I", located in the fuse and fusible link box).
To circuit breaker terminal No. 1.
Through circuit breaker terminal No. 2.
To power window relay terminal No. 3.
To front power window main switch terminal No. 4.
To front power window switch RH terminal No. 6.

With ignition switch in ON or START position, power is supplied:

Through 10-amp fuse No. 10, located in the fuse block (J/B).
To rear power window switches terminal No. 7.
To Smart Entrance Control Unit (SECU) terminal No. 27.

Ground is supplied to power window relay terminal No. 1 through body grounds M9, M25 and M87. For body ground locations, see WIRING DIAGRAMS .

Ground is supplied to the left rear power window switch terminal No. 8 through body grounds B7 and B46 (with rear sunshade), or B12 (without rear sunshade). For body ground locations, see WIRING DIAGRAMS .

Ground is supplied to the right rear power window switch terminal No. 8 through body grounds B106 and B127. For body ground locations, see WIRING DIAGRAMS .

The power window relay is energized and power is supplied:

Through power window relay terminal No. 5.
To front power window main switch terminal No. 11.
To right front power window switch terminal No. 13.
To right and left rear power window switch terminal No. 5.