Power Door Lock Operation

BCM receives a LOCK signal from key fob. BCM locks all doors with input of LOCK signal from key fob.

When an UNLOCK signal is sent from key fob once, driver's door will be unlocked.

Then, if an UNLOCK signal is sent from key fob again within 5 seconds, all other door will be unlocked.

Power door lock operation mode can be changed using "DOOR LOCK-UNLOCK SET" mode in "WORK SUPPORT" of "POWER DOOR LOCK SYSTEM".

Refer to WORK SUPPORT  .

Power door lock operation mode can be changed also on the display.

Refer to SETTING SCREEN . (without navigation system)

Refer to VEHICLE ELECTRONIC SYSTEMS . (with navigation system)