Service Specifications
MITSUBISHI GENERATOR SPECIFICATIONS (3.5L)
| Application | Specification | |
|---|---|---|
| Generator Model | A3TG0191 | |
| Nominal Rating | 12 Volts, 110 Amps | |
| Minimum RPM Under No-Load (With 13.5 Volts Applied) | 1000 RPM | |
| Hot Output Current (With 13.5 Volts Applied) | ||
| At 1300 RPM | 37 Amps | |
| At 2500 RPM | 92 Amps | |
| At 5000 RPM | 103 Amps | |
| Regulated Output Voltage | 14.1-14.7 Volts | |
| Minimum Brush Length | .197 in.(5.0 mm) | |
| Brush Spring Pressure | 17.6-21.9 ozs. (4.9-6.1 N) | |
| Slip Ring Minimum Outer Diameter | .87 in. (22.1 mm) | |
| Rotor (Field Coil) Resistance | 1.7-2.1 Ohms | |
HITACHI GENERATOR SPECIFICATIONS (4.5L)
| Application | Specification | |
|---|---|---|
| Generator Model | LR1110-716 | |
| Nominal Rating | 12 Volts, 110 Amps | |
| Minimum RPM Under No-Load (With 13.5 Volts Applied) | 1100 RPM | |
| Hot Output Current (With 13.5 Volts Applied) | ||
| At 1800 RPM | 70 Amps | |
| At 2500 RPM | 91 Amps | |
| At 5000 RPM | 110 Amps | |
| Regulated Output Voltage | 14.1-14.7 Volts | |
| Minimum Brush Length | .236 in. (6.0 mm) | |
| Brush Spring Pressure | 3.6-12.3 ozs. (1.00-3.43 N) | |
| Slip Ring Minimum Outer Diameter | 1.024 in. (26.0 mm) | |
| Rotor (Field Coil) Resistance | 2.31 Ohms | |