AWD Control Unit System

WITH CONSULT-II 

Perform the self-diagnosis. Is a malfunction in the "CONTROLLER FAILREN" indication in the results?

YES or NO

1. YES: GO TO 2.
2. NO:
   1. Drive vehicle at 30 km/h (19 MPH) for at least 1 minute. Make sure AWD warning lamp does not turn ON.
   2. INSPECTION END 

1. Disconnect the AWD control unit connector.
2. Check that terminals are not deformed and the connectors were connected properly.

OK or NG

1. OK: Replace AWD control unit.
2. NG: Repair or replace the connectors.