DTC Confirmation Test
- Start engine (VDC switch off). Select DATA MONITOR with scan tool.
- Drive vehicle for at least 5 seconds at more than 19 MPH. This step may be performed with drive wheels lifted. If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE . If 1st trip DTC is not detected, go to next step.
- Drive vehicle for at least 5 seconds at more than 19 MPH. Depress brake pedal for at least 5 seconds but do not slow to less than 19 MPH. If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE . If 1st trip DTC is not detected, system is okay at this time.