Dynamometer Testing (ITB03-016A)
Publication date: 2003-04-17Reference number: ITB03-016A
Supersedes refnos: ITB03-016
DYNAMOMETER TESTING
TECHNICAL SERVICE BULLETIN
Reference Number(s): ITB03-016A, Date of Issue:
April 17, 2003
Superceded Bulletin(s): ITB03-016
| INFINITI: | 2003 FX45/35 |
| CLASSIFICATION: | EC03-007A |
| SECTION: | Engine Control System |
| APPLIED VEHICLE(S): | 2003 FX45/35 w/AWD (S50) |
NOTE:
The FX35 Two wheel drive VIN identifier description has been amended. Please discard all previous copies of ITB03-016.
SERVICE INFORMATION
Some states require "enhanced" vehicle emissions tests that use two-wheel (single axle) dynamometers. Some vehicles cannot be operated on two-wheel dynamometers because of having full time four-wheel drive or all-wheel drive (AWD) powertrains.
WARNING:
THE AWD FX45 and AWD FX35 MUST NEVER BE TESTED ON A TWO-WHEEL DYNAMOMETER. THIS COULD CAUSE SERIOUS TRANSMISSION DAMAGE. ALSO, UNCONTROLLED VEHICLE MOVEMENT MAY OCCUR THAT COULD CAUSE A CRASH AND INJURIES TO PERSONS NEARBY.
Some states use four-wheel dynamometers in their testing programs. When properly used, that equipment will not damage AWD FX45 and AWD FX35.
The AWD FX45 and AWD FX35 can be easily identified by:
- All FX45 are AWD.
For FX35:
- Confirming that an AWD badge is on the back of the vehicle.
- Confirming the vehicle has a front differential.
- Confirming that the VIN # contains a W In the 8th position (instead of a U for Two-wheel drive vehicles). Example: JNR*S*8W*3X****** is AWD / JNR*S*8U*3X****** is 2WD.
CAUTION:
VEHICLE DAMAGE CAUSED BY IMPROPER TESTING MAY NOT BE COVERED UNDER INFINITI WARRANTIES.