LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2003 >> FX45 >> Repair and Diagnosis >> Steering >> Steering Column >> Automatic Drive Positioner >> Automatic Operation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Automatic Operation

AUTOMATIC OPERATION

Function Description
Memory switch operation The seat, steering and door mirror move to the stored driving position by pushing memory switch (1 or 2).
Entry/Exiting function Exiting operation At exit, the seat moves backward and steering wheel moves forward/upward. (Exiting position)
Entry operation At entry, the seat and steering wheel returns from the exiting position to the previous driving position before the exiting operation.
Key fob interlock operation Perform memory operation, exiting operation and entry operation by pressing key fob unlock button.
NOTE:
  • Disconnecting the battery erases the stored memory.
  • After connecting the battery, insert the key into the ignition cylinder and turn the driver door switch ON (open)-->OFF (close)-->ON (open), the Entry/Exiting operation becomes possible.
  • After exiting operation is carried out, return operation can be operated.
AUTOMATIC OPERATION

Auto operation temporary stop conditions. When ignition switch turned to START during memory switch operation and return operation, memory switch operation and entry operation is stopped.
Auto operation stop conditions.
  • When the vehicle speed becomes 7 km/h (4 MPH) or higher.
  • When the setting switch, memory switch 1, or 2 are pressed.
  • When A/T selector lever is in any position other than P.
  • When the door mirror remote control switch is operated (when ignition switch turned to ON or ACC).
  • When power seat switch turned ON.
  • When ADP steering switch turned ON (telescopic operation or tilt operation).
  • When door mirror operates (only memory switch operation).
  • When driver seat sliding Entry/Exiting setting is OFF (only entry/exiting operation).
  • When steering wheel tilt and telescopic Entry/Exiting setting is OFF (only entry/exiting operation).
  • When the tilt and telescopic sensor malfunction is detected.
NOTE: During automatic operation, if the ignition switch is turned ON-->START, the automatic operation is suspended. When the ignition switch returns to ON, it resumes.