Abs System

PERFORM SELF-DIAGNOSIS
WITH CONSULT-II

Perform the self-diagnosis. Is a malfunction in the "ABS SYSTEM" indication in the results?

YES or NO
1. YES: GO TO 2.
2. NO:
  1. Drive vehicle at 30 km/h (19 MPH) for at least 1 minute. Make sure AWD warning lamp does not turn ON.
  2. INSPECTION END
CHECK DTC WITH ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
Refer to TROUBLE DIAGNOSIS .

OK or NG
1. OK: GO TO 3.
2. NG: Check the malfunctioning system.
AWD CONTROL UNIT CONNECTOR INSPECTION
1. Disconnect the AWD control unit connector.
2. Check that terminals are not deformed and the connectors were connected properly.
OK or NG
1. OK: INSPECTION END
2. NG: Repair or replace the connectors.