ASCD Clutch Switch

1. Turn ignition switch OFF.
2. Disconnect ASCD clutch switch harness connector.
3. Check harness continuity between ASCD clutch switch terminals 1 and 2 under the following conditions.
   ASCD CLUTCH SWITCH CONTINUITY TEST CONDITION CHART
   
   

   Condition	Continuity
   When clutch pedal is fully released.	Should exist.
   When clutch pedal is depressed.	Should not exist.

   Fig 1: Checking Harness Continuity Between ASCD Clutch Switch Terminals 1 And 2

   Courtesy of NISSAN MOTOR CO., U.S.A.

If NG, adjust ASCD clutch switch installation, and perform step 3 again.