LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2003 >> G35 2D Coupe, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls System - Component Testing - Coupe >> ASCD Brake Switch >> Component Inspection >> Stop Lamp Switch (For M/T Models)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Stop Lamp Switch (For M/T Models)

  1. Turn ignition switch OFF.
  2. Disconnect stop lamp switch harness connector.
  3. Check harness continuity between stop lamp switch terminals 1 and 2 under the following conditions.
    STOP LAMP SWITCH CONTINUITY TEST CONDITION CHART

    Condition Continuity
    When brake pedal is fully released. Should not exist.
    When brake pedal is depressed. Should exist.

    If NG, adjust stop lamp switch installation, and perform step 3 again.

    Fig 1: Checking Harness Continuity Between Stop Lamp Switch Terminals 1 And 2 (2-Terminal - M/T)
    G03583578Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals