DTC Confirmation Test (Using CONSULT-II)
NOTE:
Use the following test to check overall function of cooling fans. During this test, 1st trip DTC may not be confirmed.
- Allow engine to cool. Check coolant level in radiator and reservoir tank. If coolant level is okay, go to next step. If coolant level is low, go to DIAGNOSTIC PROCEDURE .
- If coolant was filled by customer, go to DIAGNOSTIC PROCEDURE . If coolant was not filled by customer, go to next step.
- Turn ignition on. Perform COOLING FAN in ACTIVE TEST mode with CONSULT-II. If cooling fans operates properly, system is okay at this time. If cooling fans do not operate properly, go to DIAGNOSTIC PROCEDURE .