DTC Confirmation Procedure
WARNING: This page is about a different car, the 2004 Infiniti I35. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.
WITH CONSULT-II
- Turn ignition switch ON.
- Select DATA MONITOR mode with CONSULT-II. See Figure .
- Start engine and wait at least 5 seconds.
- If DTC is detected, go to DIAGNOSTIC PROCEDURE .
WITH GST
Follow the procedure With CONSULT-II.